
A diamond's shape is its outline seen from above. The ten shapes you'll meet most are round, oval, pear, princess, cushion, emerald, Asscher, radiant, marquise and heart. Shape changes how big a stone looks for its weight, how it sits in a setting and how easily it chips, so the right choice depends on your hand, your setting and how you live. This guide compares all ten in millimetres and explains how to choose.
Diamond Shape vs Cut
Shape is the outline, such as round, oval or pear. Cut describes how well the facets, proportions and polish handle light. Two diamonds can share a shape and still look very different because their cut quality differs.
Most shapes use one of two faceting styles:
- Brilliant faceting - Uses many triangular and kite-shaped facets to break light into sparkle, which also helps hide small inclusions. Round, oval, pear, marquise, heart, princess, cushion and radiant stones are cut this way.
- Step faceting - Uses long, parallel facets like stair treads, giving broad flashes of light and a clear "hall of mirrors" look. Emerald and Asscher cuts are the classic examples, and they show inclusions and body colour more openly.
GIA gives an overall cut grade, from Excellent to Poor, only to standard round brilliant diamonds in the D-Z colour range. Fancy shapes get grades for polish and symmetry but no overall cut grade, so judge their light performance by eye and by their proportions.
The 10 Main Diamond Shapes
Face-up sizes are typical figures for a well-proportioned 1.00 ct diamond. They vary with cut depth, so always check the measurements of the actual stone.
| Shape | Facet style | Typical length-to-width ratio | Typical face-up at 1.00 ct | Hides inclusions | Chip risk |
|---|---|---|---|---|---|
| Round | Brilliant | 1.00 | About 6.4 mm | Well | Low |
| Oval | Brilliant | 1.30-1.50 | About 7.7 × 5.7 mm | Well | Low |
| Pear | Brilliant | 1.45-1.75 | About 8.5 × 5.5 mm | Moderately | Higher at the point |
| Princess | Brilliant | 1.00-1.05 | About 5.5 × 5.5 mm | Well | Higher at the corners |
| Cushion | Brilliant | 1.00-1.20 | About 5.5 × 5.5 mm | Moderately | Low to moderate |
| Emerald | Step cut | 1.30-1.50 | About 7.0 × 5.0 mm | Poorly | Low to moderate |
| Asscher | Step cut | 1.00-1.05 | About 5.5 × 5.5 mm | Poorly | Low to moderate |
| Radiant | Brilliant, trimmed corners | 1.00-1.35 | About 6.0 × 5.5 mm | Well | Low to moderate |
| Marquise | Brilliant | 1.75-2.15 | About 10.0 × 5.0 mm | Moderately | Higher at the points |
| Heart | Brilliant | 0.90-1.10 | About 6.5 × 6.5 mm | Moderately | Higher at the cleft and point |
Round, Oval and Pear Diamonds
- Round brilliant - A standard round brilliant has 57 facets, or 58 if the tiny culet at the base is counted. It is the benchmark for sparkle, hides small inclusions well, and with no corners its chip risk is low, so a four- or six-claw setting is usually enough.
- Oval - An oval is a brilliant stretched into an elongated outline. Most ovals show a bow-tie: a darker band across the middle where less light returns to the eye. Some bow-tie is normal; what matters is how strong it looks face-up, so view the stone in person or on video before you buy.
- Pear - A pear combines a rounded end with a single point. It can also show a bow-tie. Most people wear the point towards the fingertip, and the point should always sit under a V-shaped claw or a bezel, because that is where chips start.
Square and Step-Cut Shapes: Princess, Cushion, Radiant, Emerald and Asscher
- Princess - A square or slightly rectangular brilliant with sharp corners. It sparkles strongly, with more angular flashes than a round. The four corners are its weak points, so choose V-shaped claws or a bezel at each one.
- Cushion and radiant - Both are brilliant-style. A cushion has rounded corners and a softer, more traditional look; a radiant has trimmed corners and strong sparkle in a square or rectangular outline. Their softened corners make them less prone to chipping than a princess.
- Emerald and Asscher - Both are step cuts with trimmed corners: the emerald is rectangular, the Asscher square. They give broad flashes rather than fine sparkle, and their open facets show inclusions and colour more readily, so clarity and colour choices matter more with these two.
Marquise and Heart Diamonds
- Marquise - A boat-shaped brilliant with two points. Its long outline gives the largest face-up length of the ten, and many people find it makes the finger look longer. Each point needs a V-shaped claw or protective tip.
- Heart - Two rounded lobes meeting at a point, divided by a central cleft. It needs a claw at the point and careful setting at the cleft. The outline reads most clearly in larger stones, and the heart is traditionally associated with romance.
Which Diamond Shapes Look Biggest for Their Weight?
Carat measures weight, not size. Shapes that spread their weight across a long outline, rather than holding it in depth, show more surface area face-up.
- Marquise, oval and pear usually look the largest at the same weight, because of their long outlines.
- Emerald faces up a little larger than a round of the same weight.
- Radiant faces up similarly to a round.
- Princess, cushion and Asscher carry more weight in depth, so they often look smaller than their carat weight suggests.
Two 1.00 ct stones of the same shape can still differ noticeably, so compare the millimetre measurements and depth percentage on the grading report, not just the carat weight.
Which Diamond Shape Is Most Expensive?
Round brilliants usually cost the most per carat. Cutting a round removes more of the rough crystal than most fancy shapes, and demand for rounds is consistently high. Fancy shapes such as oval, pear, marquise and emerald often keep more of the rough, which is one reason they can cost less per carat at the same grade.
Per-carat price isn't the price of a finished ring: the setting, metal and any side stones all add to the total. To see the difference shape alone makes, compare stones at the same carat weight, colour and clarity.
How to Choose a Diamond Shape
- Set your budget - Decide on a total figure first, remembering that rounds cost more per carat.
- Pick sparkle or clarity - Brilliant cuts hide small inclusions; step cuts (emerald, Asscher) show them, so need higher clarity.
- Think about your hand - Elongated shapes cover more of the finger's length; round, princess and cushion are more compact.
- Match the setting to your life - If you work with your hands, favour round, oval or cushion in a bezel or low claw setting. Points and corners (pear, marquise, princess, heart) need V-shaped claws or a bezel.
- Compare in millimetres - Put shortlisted stones side by side at the same carat weight and judge the size on the hand, not by weight.
Diamond Shapes in Lab-Grown and Simulated Stones
Lab-grown diamonds have the same chemistry and hardness as mined diamonds and are cut in all the same shapes. The US Federal Trade Commission's Jewelry Guides treat a lab-grown diamond as a diamond, provided it is clearly described as lab-grown. IGI grades lab-grown stones on the familiar colour and clarity scales, while GIA has used descriptive categories for lab-grown diamonds since 2025. Browse loose lab-grown diamonds to compare shapes.
Moissanite and cubic zirconia look similar but are different materials with different densities, so a 1.00 ct simulant isn't the same size as a 1.00 ct diamond. Compare millimetres rather than carats.
Caring for Fancy-Shaped Diamonds
Clean in warm water with a little washing-up liquid, using a soft brush to reach under the points and the pavilion, then rinse and dry with a lint-free cloth. Step cuts show surface film quickly because of their open facets, so they benefit from a regular clean. Check the claws on pear, marquise, princess and heart stones every few months, and store pointed stones in their own pouch so they can't catch or scratch other pieces.