A diamond clarity chart grades how many internal inclusions and surface blemishes a diamond has, using 11 grades from Flawless (FL) to Included 3 (I3). Trained graders judge the stone at 10x magnification, looking at the number, size, position and visibility of the marks. What matters most to a buyer is whether the stone looks clean to the naked eye, and that depends on the stone's size, shape and setting as well as its grade.
What Diamond Clarity Means
Clarity is one of the 4Cs, alongside colour, cut and carat weight. The standard scale was developed by GIA, and most major laboratories use a similar FL-to-I3 style scale. A grader weighs five factors together:
- Size - Larger inclusions are more visible and lower the grade.
- Number - More marks generally mean a lower grade, though one large mark can outweigh several tiny ones.
- Position - A mark under the table (the flat top facet) is easier to see than one near the edge, where a claw may hide it.
- Nature - Internal inclusions are treated differently from surface blemishes such as polish lines.
- Relief - A dark mark stands out more than a pale, colourless one.
Diamond is 10 on the Mohs scale, so it resists scratching, but it can still chip along its cleavage planes. A feather (a small internal fracture) that reaches the surface or sits near the girdle is a weak point in a ring worn every day.
The Diamond Clarity Chart: All 11 Grades
| Grade | Full name | What a grader sees at 10x | Usually visible to the eye? |
|---|---|---|---|
| FL | Flawless | No inclusions or blemishes | No |
| IF | Internally Flawless | No inclusions; minor blemishes only | No |
| VVS1 | Very, Very Slightly Included 1 | Tiny inclusions, very hard to see | No |
| VVS2 | Very, Very Slightly Included 2 | Tiny inclusions, hard to see | No |
| VS1 | Very Slightly Included 1 | Minor inclusions, difficult to see | No |
| VS2 | Very Slightly Included 2 | Minor inclusions, somewhat easy to see | Rarely |
| SI1 | Slightly Included 1 | Noticeable inclusions, easy to see | Sometimes |
| SI2 | Slightly Included 2 | Noticeable inclusions, very easy to see | Often |
| I1 | Included 1 | Obvious inclusions | Usually |
| I2 | Included 2 | More prominent inclusions | Yes |
| I3 | Included 3 | Very prominent inclusions | Yes |
The visibility column is a general guide: stone size, shape and the type and position of the inclusion all change what you actually see.
- FL and IF - Both are very rare. Face-up, they look identical to VVS stones; the difference is rarity and price.
- VVS and VS - Inclusions are tiny to minor and normally invisible without magnification, which is why VS grades are a popular choice for eye-clean stones.
- SI1 and SI2 - Inclusions are noticeable at 10x and sometimes visible unaided, especially in larger stones. Two SI1 diamonds can look quite different, so judge the individual stone. "SI3" isn't a GIA grade, though some other reports use it.
- I1 to I3 - Inclusions are obvious and can affect brilliance and, in some cases, durability. I grades often appear in small accent stones and budget fashion jewellery.
Inclusions and Blemishes: Which Marks Matter
Inclusions sit inside the diamond, formed during growth or later stress. Blemishes are on the surface, usually from cutting, polishing or wear. Inclusions usually decide the grade.
| Mark | What it is | Visibility or durability risk |
|---|---|---|
| Crystal | A mineral crystal trapped inside | Low if small and pale; higher if large and dark |
| Pinpoint | A tiny crystal seen as a dot | Low |
| Cloud | A cluster of pinpoints | Low to moderate; a large cloud can look hazy |
| Feather | A small fracture inside the stone | Moderate to high if it reaches the surface |
| Needle | A thin, rod-like crystal | Low |
| Knot | A crystal that reaches the surface | Moderate |
| Cavity | A hollow at the surface | Moderate to high; collects dirt |
| Chip | A small piece missing, often at an edge | Moderate; can worsen with knocks |
| Polish lines | Fine lines from polishing | Low |
Three to check first: feathers that reach the surface, especially near the girdle or a claw; cavities, which trap grime; and large dark crystals under the table, which sit right where the eye lands. Pale pinpoints, needles and polish lines are the least worrying.
VS1 vs VS2 and SI1 vs SI2
- VS1 vs VS2 - VS1 is one grade higher, with slightly less noticeable inclusions at 10x. Without magnification, the two usually look the same.
- SI1 vs SI2 - SI1 inclusions are often still invisible to the naked eye; SI2 is more likely to show a mark unaided, depending on where it sits and what type it is.
Two stones of the same grade can look different, so check the inclusion type and position on the grading report and compare stones in person or in magnified photos.
How Size, Shape and Setting Change What You See
"Eye-clean" means no inclusions visible to the unaided eye face-up at a normal distance. It's a trade term, not a laboratory grade, so two jewellers may judge the same stone differently.
- Cut style - Brilliant cuts such as the round break light into many flashes that mask inclusions. Step cuts such as emerald and Asscher have long, open facets that act like a window, so inclusions are easier to spot.
- Size - Inclusions allowed at a given grade can be larger in a bigger stone, and the wider table gives a clearer view inside.
- Setting - Claws and bezels can hide marks at the edge, but not one directly under the table.
| Jewellery type | How much clarity shows |
|---|---|
| Solitaire centre stone | Most: one stone, seen closely and often |
| Stud earrings | Moderate: seen in pairs at conversational distance |
| Pendant | Moderate to low: worn further from the eye |
| Side stones | Little: small stones beside a larger centre |
| Pavé or eternity band | Very little: many small stones judged by overall sparkle |
Spend on clarity where the eye lands, usually the centre stone. For pairs such as diamond earrings, matching the two stones often matters more than a single grade.
Clarity in Lab-Grown Diamonds
Lab-grown diamonds have inclusions too, but of different kinds: metallic flux in HPHT-grown stones (sometimes magnetic, appearing as dark rods or flecks) and graining or pinpoints in CVD-grown stones. IGI grades lab-grown diamonds on the familiar FL-to-I3 scale. GIA has used descriptive categories for lab-grown diamonds since 2025, rather than individual clarity grades. Check which laboratory issued a report, and compare stones graded by the same lab. Browse loose lab-grown diamonds to compare.
Clarity Enhancement and Disclosure
Two treatments make inclusions less visible:
- Laser drilling - Burns a tiny channel to a dark inclusion, which is then usually bleached or dissolved.
- Fracture filling - Injects a glass-like substance into surface-reaching cracks. The filling can be damaged by heat during jewellery repairs, and GIA does not issue grading reports for fracture-filled diamonds.
Neither changes a diamond's natural origin, but both affect value. The US FTC's Jewelry Guides call for such treatments to be disclosed, and in the UK, consumer protection law and trade guidance treat a value-affecting treatment as information buyers should be told. Ask for any treatment to be confirmed in writing, and tell your jeweller about a filled stone before any resizing or re-tipping. A UK hallmark covers the metal only; it says nothing about the diamond.
Choosing a Clarity Grade
Aim for a stone that looks clean to the eye, not the highest grade you can afford. Higher grades cost more per carat, so paying for clarity you can't see is rarely good value.
| Jewellery type | Grades to consider | Why |
|---|---|---|
| Engagement solitaire | VS2-SI1, checked individually | A large stone seen daily; SI1 stones vary |
| Everyday ring | SI1-SI2 | Inclusion position matters more than grade |
| Earrings | SI1-SI2 | Seen at a distance; match the pair by eye |
| Pendant | SI1-VS2 | Worn away from the eye |
| Eternity band | VS2-SI1 | Consistency across the stones matters most |
Before you buy, confirm the grade comes from a named grading report, check the inclusion plot for position and type where one is given, ask in writing whether the stone is treated, and view it in daylight if you can.
How to Check Clarity Yourself
- Clean the stone - Lotion and limescale can make a clean diamond look hazy. Wash it in warm water with a little washing-up liquid, brush gently, rinse and dry.
- Read the report and note where any plotted inclusions sit.
- Look face-up at 25-30 cm in daylight - If you can't see marks, the stone is likely eye-clean.
- Tilt it slowly - Some feathers only flash at certain angles.
- Use a 10x loupe and match what you see to the plot.
- Ask about anything near the girdle or surface, which can be more prone to chipping in a ring.
If it still looks cloudy after cleaning, ask a jeweller to check it before you buy.
Shop Diamonds at TJC
Browse diamond solitaire rings, 1 carat diamond rings, diamond earrings and lab-grown diamonds.