What Is a Solitaire Ring? Classic Settings Explained

By Yogesh Pathak 6 MIN READ

A solitaire ring holds a single gemstone, most often a diamond, on a band with no side stones, so the eye goes straight to the centre stone. It's the style many people picture as the classic engagement ring, but "solitaire" describes the design, not the stone: it can hold a natural or lab-grown diamond, moissanite or a coloured gem. The setting decides how securely the stone sits and how well the ring copes with daily wear.

Solitaire Ring

Feature Solitaire ring
Defining feature One centre stone, no side stones
Common centre stones Diamond, lab-grown diamond, moissanite, sapphire
Typical settings Four-claw, six-claw, rub-over (bezel), cathedral
Popular metals Yellow, white and rose gold; platinum; sterling silver
Everyday wear Depends on the setting height and stone hardness

What a Solitaire Ring Is

The name comes from the Latin solitarius, "alone". A solitaire is a classic engagement style, but it's just as often worn as a dress ring or on the right hand. Because the design is so simple, the stone, setting and metal carry the whole look. By custom, the single stone is associated with a single, lasting commitment, though many people choose one simply for its clean shape.

In the strictest sense, a solitaire has one stone and plain shoulders. Some retailers also call a ring with small stones set into the shoulders a solitaire, so if you want the purist version, look for "plain shoulders" or "no side stones" in the description.

A Style, Not a Stone

"Solitaire" describes how a ring is designed; "diamond" describes what the stone is. So a solitaire isn't automatically cheaper or dearer than a diamond ring: price follows the stone's material, size, cut and quality, plus the metal. A lab-grown centre will usually cost less than a natural diamond of similar size and quality, whatever the setting.

Naming matters too. The US FTC's Jewelry Guides say a lab-grown diamond must be clearly described as lab-grown, and simulants such as moissanite shouldn't be called diamond. Check the product title and description for the stone type before you buy.

Solitaire Settings Compared

The setting is the metal framework that holds the centre stone.

Setting How it grips Light into the stone Snag risk Upkeep
Four-claw Four prongs over the girdle High Medium to high Check claws regularly
Six-claw Six prongs spread the grip High Medium Check claws regularly
Rub-over (bezel) A metal collar all the way round Lower, from the top Low Minimal
Tension-style Band pressure holds the stone High Low to medium Professional checks; hard to resize
Cathedral or basket head Arches or a gallery support the claws Medium to high Low to medium Clean under the stone
  • Four or six claws? - Four claws show more of the stone. Six spread the grip more evenly, so the stone has more support if one claw wears. Raised claws can catch on knitwear and hair, and they wear over time, so have a jeweller check them periodically.
  • Rub-over - A thin rim of metal holds the stone all the way round, giving a smooth, low profile that suits hands-on work. Less light enters from the sides, so the stone can look slightly smaller.
  • Tension-style - The stone appears to float in a groove held by the band's spring pressure. It looks modern, but a knock to the band matters more, and these rings are hard to resize.
  • Cathedral and basket - A cathedral head lifts the stone on sweeping arches; a basket adds crossbars beneath the claws. Their open undersides collect soap and dust, so brush them clean regularly.

Stone Shapes for a Solitaire

The round brilliant is the traditional choice, cut to return as much light as possible. Oval and cushion read softer, and emerald cuts more vintage. Shapes with points or sharp corners need extra protection: a V-tip claw over the point of a pear, and a claw over each corner of a princess. Our engagement ring styles guide compares solitaire, halo and three-stone designs in more depth.

Choosing the Centre Stone

In a solitaire, the one stone takes every knock, so hardness matters more than in a ring with several smaller stones. Hardness isn't the same as toughness, though: even a hard stone can chip if struck at the wrong angle.

Stone Mohs hardness Everyday wear
Diamond 10 Suits daily wear; can still chip on a hard knock
Lab-grown diamond 10 Same material and hardness as mined diamond
Moissanite 9.25 Very durable, with strong rainbow sparkle
Sapphire 9 Suits daily wear; blue and many other colours
Tanzanite 6-7 Best for occasional wear or a rub-over setting

For daily wear, diamond, lab-grown diamond, moissanite and sapphire are the practical choices. Tanzanite's blue-violet is striking but softer, so it suits a protective setting and should come off for manual work. See our tanzanite engagement rings guide for more.

Metals and UK Hallmarks

A UK hallmark shows who made a piece, its fineness and which Assay Office tested it. Common fineness marks on a solitaire band are 375 (9ct gold), 750 (18ct gold), 925 (sterling silver) and, most often, 950 (platinum). Under the Hallmarking Act 1973, items below 1 g of gold, 7.78 g of silver or 0.5 g of platinum are exempt, so a slim band may carry no mark; ask the seller if you can't see one.

White gold is usually rhodium plated for a bright finish. The plating wears gradually and a jeweller can renew it. For more on carats, see our 9ct vs 18ct gold rings guide.

How to Choose a Solitaire in Six Steps

  1. Set a budget - The centre stone usually accounts for most of the cost.
  2. Choose the centre stone by hardness, look and price.
  3. Choose the shape that suits the wearer's hand.
  4. Choose the setting for their lifestyle: a low rub-over for hands-on work, raised claws for maximum light.
  5. Choose the metal and check the hallmark.
  6. Confirm the ring size - Measured in the afternoon at room temperature. Wider bands may need a half size up. Our ring size guide explains how.

What Wedding Ring Goes With a Solitaire?

It depends on how high the stone sits. A raised cathedral setting usually leaves room for a straight band to sit flush beneath it. A low rub-over setting leaves little space, so a straight band may leave a gap; a curved or notched band can sit closer. Try both rings together before buying, and match the metal and carat so they wear at a similar rate.

Caring for a Solitaire

Hard water, common across much of southern and eastern England, can leave a film under the stone that dulls its sparkle.

  1. Soak for 5-10 minutes in warm water with a few drops of mild washing-up liquid.
  2. Brush gently beneath the stone with a soft toothbrush, where dirt gathers.
  3. Rinse and dry with a lint-free cloth.

Avoid bleach and limescale removers. Don't use an ultrasonic cleaner on softer or treated stones such as tanzanite; clean those by hand. Have the claws checked by a jeweller periodically, as worn claws are a common cause of lost stones.